TEGAM Inc.
TEGAM designs, manufactures and calibrates instrumentation that impacts your daily life in surprising ways. Our goal is to make your measurement task easier, faster and more accurate. We continuously invest in R&D of products and calibration techniques that allow you to make your critical measurements with the highest confidence. Our electrical measuring capabilities include temperature, RF power, and micro-Ohms.
- 800-666-1010
(440) 466-6100 - (440) 466-6110
- sales@tegam.com
- 10 Tegam Way
Geneva, OH 44041
United States
-
product
100 Ohm Platinum RTD Thermometer
869
Models 868 and 869 digital RTD thermometers measure temperatures from -360F to 1100F, (-220C to 630C). Compatible with either 3 or 4 wire RTDs, temperature measurement is performed with a best accuracy of .4F(.3C). These thermometers are specially constructed with a heavy duty ABS case specifically designed for industrial use.
-
product
Economical Thermocouple Thermometer °C (Type K)
874C
Tegam''s 874F and 874C Budget Series thermometers provide the economical solution for general-purpose temperature measurement needs. The units accept type K thermocouples and probes. Constructed with ABS material for resistance to inorganic salts, alkalies, and many acids and exceptional durability, this meter is designed for the toolbox and for use in the field.
-
product
RH / Temperature Controller and Probe
CSP-C1
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
product
Dual Type IV Power Meter
1806
Designed for use with bolometer elements to measure high frequency or microwave power from 10W to 30 mW. Model 1806 also functions as a standard for the calibration of bolometers mounts, detectors, RF voltmeters, and for precision insertion loss measurements when used with the TEGAM System IIA, automatic power meter calibration system.
-
product
Platinum RTD Thermometer
868
Models 868 and 869 digital RTD thermometers measure temperatures from -360F to 1100F, (-220C to 630C). Compatible with either 3 or 4 wire RTDs, temperature measurement is performed with a best accuracy of .4F(.3C). These thermometers are specially constructed with a heavy duty ABS case specifically designed for industrial use. Model 868 reads in F and Model 869 reads in C.
-
product
Attenuator & Signal Calibrator (30MHz Receiver)
VM-7
The TEGAM Model VM-7 is a 30MHz receiver that performs precise measurement of RF power ratios over a wide dynamic range. It offers averaging, high resolution, and offset features to improve measurements and speed accessible through front panel keystrokes, or remotely through a GPIB controller.
-
product
High Temperature RH / Temperature Transmitter
HTRH-W
TEGAM''s high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40F-356F (-40C-180C). Probes are constructed with stainless steel and Teflon cable. Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall mounting bracket.
-
product
Temperature Probe, 100 ohm, RTD, General Purpose/Immersion
8693
100, platinum RTD probe used for general purpose measurement of temperature of gases, liquids, soft materials, or small area surfaces.
-
product
Temperature Calibrator/Thermometer
855
The ideal solution for anyone that needs a hand held, multi-purpose calibrator to perform field or lab tests on temperature probes or thermometers. The 855 meter will simulate, source, measure and record the same thermocouple types as the 850, K-J-T-E, and adds N-B-R-S-G-C-D types. The meter also supports 1000, 100k, 100 RTD''s but does not support thermistor''s.
-
-
product
10 MHz to 18 GHz Frequency Converter
8852
The 8852 Frequency Converter is designed to expand the VM-7 frequency range beyond 30MHz. The 8852 converts frequencies between 10MHz and 18GHz to the 30MHz signal required by the VM-7 while maintaining the power level of the original signal. The 8852 can also provide a 2GHz to 18GHz signal to drive the Frequency Converter Model 8853 for measurements above 18GHz.
-
product
Thermocouple Thermometer, Single Input, °C &°F (K, J & T) w/ Type K Wire Sensor
819A
The Model 819A digital thermometer is compatible with type K, J, or T thermocouple probes to provide a wide range of temperature measurements, (-346F to 2502F). The heavy-duty case is specifically designed for durability and resistance to contaminants such as dust and chemicals. It also features a tilt bail for hands-free or bench top operation. An optional protective rubber boot & belt clip, PN#8204, is available to protect the meter against drops and other physical stresses.
-
product
High Temperature RH & Temperature Probe Transmitters
HTRH-D
TEGAM''s high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40F-356F (-40C-180C). Probes are constructed with stainless steel and Teflon cable. Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall mounting bracket.
-
product
RF Thermistor Power Meter
1830A
Thermistor based RF power sensors are universally recognized as the most accurate means to measure and transfer RF power. Compatible with thermistor power sensors from: Agilent (HP), TEGAM, Weinschel, Hughes, General Microwave, Millitech. Supports 100 and 200 thermistors. Integrates bridge balancer and power meter into one package. Four digit calibration factor resolution. Full remote programmability. Heater control for ovenized sensors. LXI Compliant.
-
product
High Speed Microohmmeter, HI/GO/LOW Outputs
1740
Basic Accuracy: 0.02%Measurement Speed: 10 msRange : 20 m to 20 MResolution : 1 Programmable reference currentsGPIB, RS-232 (model 1740/GPIB) and PLC compatibilityKelvin Klips, Spade Lugs or Kelvin Probes availableEasy to operate and easy to integrate1-year warranty
