- Virginia Panel Corporation
product
Module Accessory Kit, Quantity 26, 4-40 x .625" Captive Socket Head Cap Screws
510109366
Used with modules: 510104135, 510104136, 510150115, 510150116, 510150130, 510150136, 510150137, 510150147, 510151105, 510151106 and 510151124.
-
product
Tripod
10753B
The Keysight 10753B Tripod provides a mounting for the Keysight 5519A/B laser head. The tripod allows Keysight 5530Laser Calibrationsystem optics to be located remotely from the laser head, yielding greater accuracy and simplifying fixturing. The remote setup also eliminates heat-caused distortions. The Keysight 10753B adjusts for height, rotation, tilt, and lateral offset. The tripod is collapsible, covers a height range of 900 mm (35.5 in) to 1630 mm (64.0 in), and has a net weight of 14 kg (31 lb). The Keysight 10753B tripod complements a family of measurement optics and lasers that comprise Keysight laser interferometer calibration systems.
-
product
Drive Recorders & Monitor
ES700
The ES700 family of products is focused on the in-vehicle tasks of data collection and monitoring. There are currently three products in this product family: The ES710 Drive Recorder, the ES715 Drive Recorder and the ES780 Heads Up Display.
-
product
Picosecond Laser
PIXEA
The PIXEA is a high-quality laser system for OEM and R&D applications generating ultra-short optical pulses by using gain-switched laser diode technologies. The laser features high-quality picosecond laser pulses with no satellite pulses and minimize pulse tail. The PIXEA series offer a large variety of centered wavelengths between 375 nm and 2 um. The pulse duration down to 20 ps is optimized for each wavelength. The system is based in two modules or one module, the laser head and the dedicated Control Unit including the GUI software. Different optical output options are available, including free space collimating optics and fiber coupled.
-
product
Optical Power Meter with Optical Head
GM8012 + 2 X GM8300X
The UC8820 + 2 X UC8820X optical power meter with optical head offer superior performance for the test of DWDM components, AWG & PLC components, optical amplifiers, and other general purpose of fiber optical test and measurement applications. It is special design for volume production line application.
-
product
Static Control/UV Curing Devices
Panasonic Industrial Devices Sales Company of America
Static Controls (Ionizers)Panasonic offers static elimination tools and Sensors in various form factors, to fit specific application requirements.UV Curing DevicesPanasonic offers LED and lamp spot-type UV Curing Systems. These systems can be controlled manually or integrated into automated applications and configured with replaceable heads, cables and lenses to best fit application requirements.
-
product
Signal Integrity Test Products
S1
*Fixtureless Test Solution*Automated Optical Inspection*DC Electrical test*Tests any backplane – Small, large, simple, complex*Now available with 4 heads
-
product
USB Axis Module
E1735A
The E1735A USB Axis Module is the electronic interface for the 5519A/B laser head used in the Keysight 5530 Laser Calibration System. It also provides the interface for the 10888A remote control unit (optional) and the A-quad-B encoder input (optional).
-
product
Protection Heads And Tubes
Choose from a wide variety of industrial protection heads and tubes to protect your temperature sensor probe from your rugged process application or surrounding environmental conditions.
-
product
Custom Gauging
As the world’s leading bore gauge manufacturer, Bowers Group has also earned a reputation for manufacturing custom heads for non-standard applications.
-
product
Test System
ITC57300
The ITC57300 Dynamic Parametric Test System mainframe accepts Test Heads that perform nondestructive transient measurements on semiconductor devices such as Insulated Gate Bipolar Transistors (IGBT), power MOSFETs, diodes, and other bipolar devices(requires additional optional bias power supplies and custom personality boards). Included in the mainframe are all test equipment and software necessary to analyze and perform resistive and inductive switching time, switching losses, gate charge, Trr/Qrr, and other transient tests.
-
product
AMIDA 3KS Tester
The AMIDA-3KS test system provides a lower cost, cost-optimized test solution for all consumer power management ICs and portable product components. The AMIDA-3KS tester provides 6 board slots in the test head for the required number of analog board channels, thus reducing the overall system procurement cost, making the cost-effectiveness of each board channel 2 times higher and more flexible. The customer's product testing time is greatly shortened.
-
product
Small Fanless 3D Control FAYb Laser Marker
LP-M Series
Panasonic Industrial Devices Sales Company of America
The LP-M series offers a small, fan-less head design with an IP64 protection to prevent dust and water entering from any direction. The 3D Control capability allows marking on various types of products and complicated shapes to meet a large number of application needs. - 20, 50 & 100 Watt Models- Compact IP64 Rated Head- Full 3D Features- Auto Focus capable- Redundant Safety Features
-
product
Laser Trackers
Radian Series
The smallest, lightest, most accurate laser measurement tool. API’s compact and rigid UNIBODY tracker design allows for shaft mounted motors, encoders and laser. The UNIBODY shaft mounted laser innovation minimizes Abbe offset errors, while also housing laser source, optics, camera and major head electronics in the center of the tracker body.
-
product
Laser Head Cable, 3 m
10881D
Provide reliable power with this spade lug that connects the laser head to multiple laser boards.
-
product
Medical Face Masks Flammability Tester
Sataton Instruments Technology CO., Ltd
Medical face masks flammability tester is to determine the fire resistance performance of medical face masks and full face masks. The tester can provide a specific flame and make the dummy head with facepiece move to the flame under a specific speed. The operator can observe the effects of the flame on the masks and facepiece. The tester is suitable for medical face mask, respiratory protective equipment and full face masks.
-
product
Break-Over Wrenches
Using break-over wrenches helps you support your quality control inspectors by empowering your workers to prevent assembly errors. Designed to accurately tighten diverse fasteners, break-over wrenches inform their operator when the right torque is reached by deflecting on their built-in hinge. As a result, you can reduce lost product or rework related to over- and under-torque conditions. Plus, their small size enables them to fit into areas with tight clearances. The end result is a boost in both productivity and project ROI. And with break-over wrenches, Mountz gives you the flexibility to switch out heads for tricky fasteners or to get more use out of your existing tools.
-
product
Precision Flying Probe Platforms For Automated Test Applications
Flying Probe technology is used to automate the testing of printed circuit boards (PCB) that would otherwise have to be tested manually. Adding a Huntron Access Prober to your test procedure will significantly decrease test times therefore increasing productivity.Access Probers can accurately place a probe on test points with high accuracy achieved using micro-stepping motors and linear laser encoders. Probing the smallest surface mounted devices is possible. Hunt...show more -
product
Pod/Nest Fixtures
Nest and Pod Fixtures are used to test components and sub-assemblies. They typically are built in an array and the devices under test are subjected to tests that simulate operating conditions or life-cycle testing. Test Head Engineering is experienced in providing nest and pod testers that meet the connectivity, ergonomic and mechanical requirements of component testing.
-
product
Gasoline Engine Tachometer
SE-2500A
SE-2500A is a non-contact handheld tachometer designed for gasoline engine measurement. Detection, measurement, and display parts are all in one unit and batteries are built in the unit. Moving the detector (head of the SE-2500A) close to an ignition coil can measure rotation speed at the unit of 1 r/min or 0.01 r/s. Up to 20 measurement data can be stored in the internal memory that is convenient for later checking.
-
product
Rotating Optical Chopper
300C and 300CD
Scitec Instruments Model 300 is a high stability variable frequency optical chopper. The basic system consists of a control unit, a chopping head and a set of four chemically blacked photo etched discs. This system provides operation over the frequency range 5Hz to 3kHz.
-
product
Fiber optic active antennas / field probes
EFS-105
The EFS-105 is the first in a family of fiber-optic active antennas & E-field probes. The field distortion caused by the probe head is nearly zero due to the exceptionally small probe head and the all-optical signal transmission and power supply. This gives an invaluable advantage for near field measurements and measurements close to metallic parts.
-
product
Radial Gearing Multipliers
Mountz radial gearing torque multipliers are specifically designed to meet the needs of companies servicing plate heat exchangers in HVAC, chemical, dairy, marine, and petrochemical applications. Able to deliver repeatable, accurate amounts of torque, Mountz radial gearing torque multipliers prevent damage to plate heat exchangers during routine service, reducing the risk of expensive unplanned equipment downtime. The low profile heads of Mountz radial gearing torque multipliers allow them to fit into tight access points, helping you work more effectively. With over fifty years of direct industry experience, Mountz tools can be trusted with the costly assets your company relies on.
-
product
Horizontal Dilatometers
TA Instruments’ unique True Differential configuration makes our dilatometers the preferred choice for the most accurate measurement of Coefficient of Thermal Expansion (CTE). The high precision linear position sensor, the thermostat equipped measuring head housing, and the use of thermally ultra-stable materials all contribute to the outstanding displacement resolution, and ensure the most accurate measurement of low CTE values.
-
product
Static Pressure Meters
Portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging. The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.
-
product
Exciter Head
The Exciter Head, with its force and displacement transducers, generates and measures the force or torque to the structure being tested and provides feedback signals for control of the test variables.
-
product
Adjustable Distance Detecting Head Laser
LV-S31 Series
Adjustable Distance Detecting Head Laser. Bright output indicator. 0.08" Spot Diameter. Unaffected Target Color
-
product
Thermopile Laser Power Measuring Heads
HP Series
The HP25S head is specially designed for portable applications through the use of a smaller heat sink. This gives the head smaller dimensions but means that high powers are only possible for a short time.?
-
product
Economic Extreme Power Temperature Forcing System
ECO Cool Dual Edition
Mechanical Devices is pleased to offer its customers with the first direct phase change TCU with DUAL head. Each head can be controlled individually. This DUAL head unit makes it possible to reduce the cost per workstation, saves space, reduces power consumption and heat emission in the laboratory or production hall.MD Thermal control units were designed with high efficiency and flexibility in mind, allowing for customization to suit different package and interface variations. The system allows for temperature forcing across a wide range of device sizes and types, whether socketed or soldered to the board.
-
product
In-Line Spectroscopic Ellipsometer for Web Coater and Roll to Roll Systems
UVISEL
The UVISEL Spectroscopic Phase Modulated Ellipsometer is a turn-key thin film metrology instrument for in-line measurement of thin film thickness and optical properties. It features rapid measurement capability with data acquired every 50 ms for powerful control of thin film uniformity across the entire web.The design of the UVISEL ellipsometric heads allows simple integration into roll-to-roll systems, while the software provides advanced communication capabilities suited to roll-to-roll production.
-
product
Air-Cooled Nanosecond DPSS Laser Head
BH9206-80
The BH9206‐80 laser series is a compact, air‐cooled nanosecond DPSS laser designed for industrial, scientific and military applications. Utilizing diode pumped, air‐cooled technologies, the BH9206‐80 is capable of producing 80mJ at 1064nm with repetitions rates up to 30Hz with a 6ns pulse width.
