- Taylor Dynamometer, Inc.
product
Engine Dynamometer
DX38
Power: 2,000 hp (1,491 kW)Torque: 6,434 lb-ft (8,723 Nm)Speed: 4,000 rpmWater Use*: 145 gpm (548.9 lpm)Inertia Value**: 160.7 lb·ft2 (6.8 kg·m2)Shipping Weight: 2,634 lb (1,195 kg)Rotation: bi-directional
-
product
Engine Dynamometer
DE720
Power: 966 hp (720 kW)Torque: 3,320 lb-ft (4,500 Nm)Speed: 3,750 rpmWater Use*: 124 gpm (469.4 lpm)Inertia Value: 126 lb·ft2 (5.3 kg·m2)Shipping Weight: 9,259 lb (4,200 kg)Rotation: bi-directional*No Cooling System
-
product
Diesel Fleet Maintenance Chassis Dynamometer
MD-7500
At the heart of the MD-7500 is a set of three air-cooled eddy current power absorbers. Each absorber, or brake, can hold up to 600-hp (total power of 1,800-hp) more than enough to simulate a fully loaded transit bus. As the systems PAU''s (brakes) are air-cooled, no water is required to or from the device eliminating the high cost of water consumption and/or the cost of an expensive water recovery system which can sometimes exceed the cost of the dynamometer system itself. Mustang is the only company that offers a Universal Fleet Test Bed without water supply requirements.
-
product
Chassis Dynamometers
With Chassis Dynamometers, it’s all about getting the best value – proven performance, durability and expert support long after your purchase. Taylor’s comprehensive line of chassis dynamometers supports testings for: performance, diagnostics, break-in, research and development, education and training.
-
product
Water Brake Engine Dynamometers
DX Series
Over 2,000 facilities worldwide count on the durability of Taylor Dynamometer’s DX Series Water Brake Dynos. On every continent, and in more than 50 countries, you’ll find a DX – often one that’s been in operation for over 30 years.
-
product
Vehicle Calorimeters, Emissions Test Systems, and Instrumentation
When you examine a TetraTek Automotive Test System you will know you have seen the future. Simply stated, we offer the most carefully considered, best engineered, and most reliable systems available. Everything from fully integrated Drive-in Emission test rooms with four-wheel dynamometers, solar simulation, high volume variable air flow, and temperature and humidity control to individual pieces of equipment and subsystems needed to upgrade existing facilities.
-
product
Vehicle Test Chambers
Our dynamometer chambers feature dependable mechanical refrigeration, superior air flow, and expansive control systems. Our dynamometer drive-in vehicle test chambers are designed to integrate directly with a dynamometer system, while simultaneously exposing vehicles to a wide variety of environmental conditions including temperature and/or humidity, rain, wind, and more. Our control systems allow for precise temperature and humidity testing while meeting your exact specifications.
-
product
Eddy Current Chassis Dynamometers
Cradle- or single-roll (top-mount) dynamometers accommodating single- or tandem-axle vehicles, with continuous vehicle power ranges from 50 hp to 622 hp (37 kW to 464 kW), Taylor’s chassis dynamometers allow a top recommended speed of 90 mph (145 kph) at full load. Look to our experts to not only help you select your optimal system, but also to provide design, configuration, installation and training for a total solution that integrates seamlessly with your operation.
-
product
2WD Dynamometers
MD-600 Series
The MD-600 is capable of measuring 2,000 horsepower and a top speed of 200-mph. A single eddy current PAU gives this dyne 900-hp of braking, while adding another PAU doubles this to 1,800-hp of loading capacity for steady state tuning and loaded mode testing.
-
product
AWD Dynamometers
MD-AWD-150
THE MD-AWD-150. Fixed wheelbase, linked AWD performance dynamometer. The key to designing an AWD dynamometer properly is to understand the methods currently being used by manufacturers in the field of AWD drivetrain technology. A dynamometer that can accommodate various types of AWD vehicle transmissions and wheelbases without excessive complication and, more importantly, without risking damage to a client’s AWD system is paramount.
-
product
Diesel Dynamometers
Heavy-duty toroidal water-brake or large eddy-current absorber, S-beam electronic torque transducer, high-flow manual (or optional electronic) engine load control, DYNOmite data-acquisition computer, rigid-frame engine test stand, wall (or stand) mounted control console, absorber to engine-block mounting adapter, heavy-duty input shaft, calibration arm, stainless-braided hoses, and full-function data wiring harness.
-
product
2WD Dynamometers
MD-500-SE XL
The 500 series dynamometer has a larger big brother – the MD-500-SE XL! The 500-SE is an excellent 2WD performance dynamometer and the XL model expands on these traits by adding in a much wider 98-inch outer track and a HUGE mechanical flywheel to increase the mechanical inertia of the dyno to about 2,000-lbs. This additional inertia helps reduce the duty cycle burden on the eddy current PAU and even allows for pulls to be done in a pinch in inertia-only mode. The XL han...show more -
product
Grinding Tool Dynamometer
UIG-17
Unitech Scales And Measurements Pvt. Ltd
Unitech offers tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.
-
product
AC Engine Dynamometer
DA16HS
Power: 16 hp (11.9 kW)Torque: 42 lb-ft (56.9 Nm)Maximum Speed: 11,000 rpmConstant Torque Range: 0 - 2,000 rpmConstant Power Range: 2,000 - 3,200 rpmDecreasing Power Range: 3,200 - 11,000 rpmRotation: bi-directional
-
product
Engine Dynamometer
DX3010
Power: 2,500 hp (1,864 kW)Torque: 8,042 lb-ft (10,904 Nm)Speed: 4,000 rpmWater Use*: 182 gpm (688.9 lpm)Inertia Value**: 199.9 lb·ft2 (8.4 kg·m2)Shipping Weight: 3,082 lb (1,373 kg)Rotation: bi-directional
-
product
AC Engine Dynamometer
DA509
Power: 509 hp (379.6 kW)Torque: 1,527 lb-ft (2,070.3 Nm)Maximum Speed: 4,500 rpmConstant Torque Range: 0 - 1,700 rpmConstant Power Range: 1,700 - 3,000 rpmDecreasing Power Range: 3,000 - 4,500 rpmRotation: bi-directional
-
product
1034 HP AC Chassis Dynamometer
TD-24-AC
Each of the four models available offers excellent dynamic response due to the low moment of inertia and high pulse torque. Advanced control capabilities allow for motoring or absorbing to provide variable road load simulations and simulated terrain.
-
product
Engine Dynamometer
DX32-HS
Power: 500 hp (373 kW)Torque: 1,608 lb-ft (2,181 Nm)Speed: 6,000 rpmWater Use*: 37 gpm (140 lpm)Inertia Value**: 42.9 lb·ft2 (1.8 kg·m2)Shipping Weight: 1,451 lb (658 kg)Rotation: bi-directional
-
product
Towing Dynamometer
RSL-10K
RSL-10K Towing Dynamometer is designed for testing today’s full-sized cars, SUVs and light trucks. The RSL-10K is built with an all-aluminum frame, sheet metal body and rides on an independent, coil spring suspension. The RSL 10K uses an eddy current absorber for power absorption. The power is provided by batteries and an alternator.
-
product
Towing Dynamometer
RS-40K
RS-40K towing dynamometer is designed for testing today’s DOT Vehicles (Classes 5 and 6) which include trucks and buses. The RS-40K is built with a heavy-duty steel frame, industrial axle and rides on an air ride suspension. The RS-40K is designed to maintain 40,000 Newtons of constant drawbar force and the ability to simulate an uphill slope of 25%. The dyno uses eddy current absorbers with special high temperature coils. The power is provided by an industrial generator. Testing is unlimited at lowspeeds.
-
product
Towing Dynamometer
RS-80K
RS-80K towing dynamometer is designed for testing Class B trucks and is the most full-featured, reliable and accurate towing dynamometer in the industry. The RS-80K is built with a heavy duty steel frame, heavy-duty industrial axles and rides on an air ride suspension. The RS-80K is designed to maintain 80,000 Newtons of constant drawbar pull and the ability to simulate an uphill slope of 25%. The towing dyno uses absorbers with special high temperature coils powered by an industrial generator so there are no lead-acidbatteries to charge and testing is unlimited at low speeds.
-
product
VLT Chassis Dynamometers for Diesel Smoke Testing under Road Conditions (CDST)
Diesel Smoke Testing by Free Acceleration Test is one! But how accurate is this Test? We all know that it is a not valuable test, but still better as none testing of Vehicle Diesel Engines. The results are not realistic in many cases. And not as good for the Engine we know.
-
product
Test Cell Measurement
Accurate Technologies’ long history in powertrain development provided insight into the day-to-day issues that were occurring during engine testing at a time when electronic devices were being introduced to monitor performance instead of traditional mechanical means. Outside of the harsh physical environments, devices used in these applications need to perform difficult high-voltage signal conditioning and high-speed synchronous pulse processing. ATI developed unique products that satisfy specific test cell or dynamometer challenges. These highly accurate products measure engine timing (IGTM) or speed (SmartTach) in convenient ways to provide information that otherwise may not be available.
-
product
2WD Dynamometers
MD-1100 Series
The MD-1100 Series took the market by storm in 2003 when it was first introduced and has been a mainstay in the performance industry ever since. The design focus for the MD-1100 is, in a word, versatility. The MD-1100 offers a tremendous amount of power measurement capabilities, loading capabilities and mechanical versatility found nowhere else in the business. Regardless of your needs, the MD-1100 series is a perfect fit.
-
product
Engine Dynamometer
DE150
Power: 201 hp (150 kW)Torque: 369 lb-ft (500 Nm)Speed: 12,000 rpmWater Use*: 28 gpm (106 lpm)Inertia Value: 2.21 lb·ft2 (0.093 kg·m2)Shipping Weight: 1,753 lb (795 kg)Rotation: bi-directional*No Cooling System
-
product
Engine Dynamometer Test and Validation
As an industry-leading partner, Trialon provides the expertise, experience, multiple test cells, and equipment to validate your engine components on out state-of-the-art Dynamometer Test Systems.
-
product
Transmission Dynamometers
Our equipment tests automatic and automated-manual transmissions. On and off-highway transmission test stands, transmission and hydraulic component test stands and valve body test stands.
-
product
Engine Dynamometer
H3602
Power: 1,600 hp (1,193 kW)Torque: 9,337 lb-ft (12,664 Nm)Speed: 2,500 rpmInertia Value**: 411 lb-ft2 (17.32 kg-m2)Shipping Weight: 8,750 lb (3,969 kg)
-
product
Engine Dynamometer
DE350
Power: 469 hp (350 kW)Torque: 1,180 lb-ft (1,600 Nm)Speed: 8,000 rpmWater Use*: 66 gpm (249.8 lpm)Inertia Value: 21 lb·ft2 (0.873 kg·m2)Shipping Weight: 3,307 lb (1,500 kg)Rotation: bi-directional*No Cooling System
-
product
Ancillary Test Cell Products
In addition to our innovative and industry leading AccuDyne AC Dynamometers and DynoLAB Test Automation Systems, SAKOR fully integrates a complete range of ancillary products and subsystems necessary for an advanced test cell. Examples include:*Combustion air consumption measurement and conditioning subsystems*Exhaust handling systems*Fuel consumption measurement and conditioning subsystems*Coolant and oil conditioning systems*Throttle actuators*Spark/Fuel controls*Combustion analysis systems*Co...show more -
product
Chassis Dynamometer Smoke Testers
A chassis dynamometer smoke tester (CDST) is used to test diesel emissions when the engine is under load. This is of course a much more realistic test than the commonly used free acceleration test. It is also better for the diesel engine.During a CDST test an automatic test cycle is performed, whereby the emission is measured at different engine loads. The monitor shows checks and actions to perform before the test, shows real-time measuring data and instructions for the driver during the test, and the end results after the test.
