Filter Results By:
Products
Applications
Manufacturers
Picosecond
one trillionth of a second.
-
product
Autocorrelator: 10fs-100ps, Any Repetition Rate
UVisIR'sreal-time long scanning autocorrelator measures laser pulses from femtosecond to picosecond. It is easy-to-use, real-time, dispersion-free, high-sensitivity and background-free! Long scanning range: 10fs-100ps. Real-time, dispersion-free and background-free scanning. High sensitivity: High-voltage(-1000VDC) PMT embeded! (Diode version is also available!). Broadband wavelength range: 500-1700nm.
-
product
PCI Express Receiver Board
AD12-2000-IRIGB
The AD12-2000-IRIGB is a high performance wideband 0.3-1.8GHz PCIe-bus receiver on a single PCIe Gen3 board, that can continuously digitize a wide portion of the RF spectrum, with a 3.6GSPS 12-bit A/D that can be synchronized with stability of better than +/- 100 picoseconds with respect to an IRIG-B 1PPS signal and global time codes from a satellite receiver or local site time reference. Designed for demanding military, scientific, industrial, communications, safety and electrical power utility applications, the AD12-2000-IRIGB has 60dB of gain adjust range (manual and AGC with programmable loop bandwidth), a wideband noise figure of 9dB, +11dBm 1dB compression point, and 2dB peak-to-peak ripple over the 300MHz to 1.6GB frequency spectrum.
-
product
Autocorrelators
Opticala Autocorrelators are devices for measuring the intensity or field autocorrelation function of light, mostly used for determining the pulse width of picosecond or femtosecond pulses, to which an electronic apparatus such as oscillascope would be too slow. The basic principle of operation of an autocorrelator for a pulse width measurement is to check the correlation of the temporal pulse trace with itself.
-
product
PXI FlexRIO Signal Generator
The PXI FlexRIO Signal Generator combines analog I/O and a user-programmable FPGA into a single, customizable instrument. The instrument enables RF signal generation up to 2.9 GHz with 12 bits of resolution. The PXI FlexRIO Signal Generator uses FPGAs from Xilinx alongside LabVIEW and Vivado programming options for custom algorithm implementation and real-time signal processing. Using this instrument with NI-TClk, you can synchronize modules in one or more PXI chassis at up to picosecond‐level accuracy for high‐channel‐count applications.
-
product
Picosecond Lasers
PL2230 Series
The first commercial fully diode pumped high pulse energy mode-locked laser, producing 28 ps pulses with up to 140 mJ pulse energy.
-
product
KATANA & PILAS Pulsed Diode Lasers
With external trigger functionality, nano- to picosecond pulse duration, and a wide range of wavelengths, the KATANA & PILAS series are our most versatile offering.
-
product
OEM, Embedded, and Custom Electronics
Picosecond timingPrecision analog and mixed signal processingDigital delay and pulse generationHigh speed photonics and fiberoptic timing distributionAerospace instrumentation and simulation
-
product
*Industrial Ultrafast Lasers
*Designed for heavy duty operation in real industry*Picosecond or femtosecond pulse duration*Tailored for micromachining, microfabrication, photovoltaics, ophthalmology
-
product
Photon Counting Detector - Single Photon Detection with Picosecond Accuracy
PPD
The PPD Series is a range of miniaturized single-photon counting detectors containing all the electronics necessary to detect single photons with picosecond accuracy.
-
product
Fluorometers
Our Fluorometers can accommodate any size work-area, and are available as compact or benchtop models, or as large modular systems, to suit your requirements. In addition, our Fluorometers can be coupled to become modular Fluorometer systems, or supercontinuum white-light laser-powered lifetime Fluorometers!HORIBA’s Fluorometers offer incredibly fast lifetime determinations down to picoseconds, deep UV absorbance and fluorescence excitation from as short as 200 nm in the UV, all the way to near-IR wavelengths of 1000 nm.
-
product
Streak Cameras
Streak camera technology was developed for measuring ultra-fast optical phenomena. OptoScope streak cameras provide temporal resolution down to the Picosecond regime. Additionally, OptoScope systems have high sensitivity allowing single photon detection. Streak cameras are the only instruments that can capture the behavior over time of multiple optical signals. Combined with a spectrometer this allows their application in the field of time resolved spectroscopy.
-
product
Fluorescence Spectrometers
PicoQuant offers several fluorescence spectrometers that range from compact table-top spectrometers for teaching or daily routine work to modular high-end spectrometers with exact timing down to a few picoseconds. Samples can be liquids in standard cuvettes, solid samples or even semiconductor wafers for in-line quality control.
-
product
Fluorescence Microscopes
PicoQuant offers different solutions for time-resolved confocal microscopy. The available systems include single molecule sensitive microscopes with picosecond temporal resolution and super-resolution imaging capabilities as well as upgrade kits for laser scanning microscopes of all major manufacturers that enable time-resolved applications.
-
product
Test Instrument
Is a programmable laser that produces picosecond pulses with pulse generator integrated. It functions as a seed pulse generator for Master Oscillator Power Amplifiers (MOPA).
-
product
Picosecond-Diode Lasers for Spectroscopy
Designed and manufactured by Becker & Hickl – bh delivers prominent picosecond diode lasers with wavelengths from the NUV to the NIR. All bh pulsed diode lasers work with simple +12V power supply or pull their power from the USB port of a PC or Notebook Computer. Other features are high repetition rate, short pulse width, unprecedented timing and power stability, and extremely low electrical noise level.
-
product
Picosecond Lasers
PL2250 Series
Featuring up to 100 mJ pulse energy and less than 30 ps (20 ps optional) pulse duration, PL2250 series picosecond mode-locked Nd:YAG lasers set new standard in high pulse energy picosecond lasers. Innovative and cost effective design allows to improve laser reliability, while reducing running and maintenance costs.
-
product
Photoluminescence Spectrometer
FLS1000
The FLS1000 sets the standard in both steady state and time-resolved photoluminescence spectroscopy for both fundamental research and routine laboratory applications. The system is a modular fluorescence and phosphorescence spectrometer for measuring spectra from the ultraviolet to the mid-infrared spectral range (up to 5,500 nm), and lifetimes spanning from picoseconds to seconds. All of this can be achieved through various upgrade routes, either at the time of order or in the future. Whether you are studying photophysics, photochemistry, biophysics, biochemistry, material or life sciences, the FLS1000 will enable you to reliably and accurately measure luminescence spectra and kinetics using state-of-the-art sources, detectors, acquisition techniques, quality optics and precision mechanics. The large sample chamber will house practically any type of sample accessory.
-
product
SFG Spectrometer
Ideal laser spectroscopy tool for in-situ investigation of surfaces and interfaces. SFG spectrometer operates from 4300 to 625 cm-1 and provides < 6 cm-1 spectral resolution. The heart of the system is a picosecond Nd:YAG laser generating 25 ps pulses that pump an OPG/DFG delivering from 260 to 20 µJ per pulse across the IR range
-
product
Differential Picosecond Pulse Generators
PicoSource PG900 Series
The fast-transition pulse can stimulate a transmission path, device or network with a broad spectrum signal in a single instant. Such a pulse is very useful for many of the high-speed broadband measurements that we need to make; for instance in time-domain reflectometry, semiconductor test, gigabit interconnect and port test and in radar.
-
product
(Visible and IR) Affordable Picosecond Streak Cameras
AXIS-SV
* 3 ps resolution * Spatial resolution of 50 m at the center of the slit * Time window 300ps to 500ns * no trace curvature
-
product
Nanosecond Pulsed Lasers
Our nanosecond pulsed lasers feature pulses in the ns range. For picosecond and femtosecond lasers please see Ultrafast Lasers.
-
product
12-Channel VME Picosecond Resolution Time-Interval Measurement Module
V660
The V660 is a 12-channel time-to-digital converter used to record the time of occurrence of twelve independent electrical pulse inputs, each independently timestamped and buffered in FIFO memory.
-
product
TCSPC Lifetime Fluorometer
DeltaPro
The DeltaPro has taken the complexity of time correlated single photon counting (TCSPC) and made it simple and affordable. Any lab can exploit the power of fluorescence dynamics using TCSPC. This system enables the seamless measurement of luminescence lifetimes from picoseconds to 1 second, using our DeltaHub timing electronics.
-
product
Picosecond Laser
PIXEA
The PIXEA is a high-quality laser system for OEM and R&D applications generating ultra-short optical pulses by using gain-switched laser diode technologies. The laser features high-quality picosecond laser pulses with no satellite pulses and minimize pulse tail. The PIXEA series offer a large variety of centered wavelengths between 375 nm and 2 um. The pulse duration down to 20 ps is optimized for each wavelength. The system is based in two modules or one module, the laser head and the dedicated Control Unit including the GUI software. Different optical output options are available, including free space collimating optics and fiber coupled.
-
product
Time to Amplitude Converters and Calibrator
A Time-to-Amplitude Converter (TAC) can achieve exceptional precision by using an analog technique to convert small time intervals to pulse amplitudes. When a timing application demands picosecond precision, a time-to-amplitude converter is a prime candidate. A time-to-amplitude converter is a productive solution for measurements less than 10 μs when time resolutions from 10 ps to 50 ns are required.
-
product
*Picosecond Lasers
A revolutionary laser technology due to its much shortened pulse duration of just 1012 seconds.
-
product
Ultrafast Laser Pulse Measurement
FROG Scan
Our FROG Scan system is versatile, adaptable and easy to use. With our FROG Scan, you can tweak a laser system or measure highly chirped pulses to calculate the amount of dispersion compensation you might need for recompression. Measure a short pulse that has been chirped out to several picoseconds, or measure pulses as short as 12 fs in real-time.
-
product
Picosecond Lasers
High single pulse energy: over 100 μJ@100kHzTotal pulse controlBurst modeVariable rep rate: single shot to 2MHzOption to 8MHzPEC: power or pulse energy controlPulse width <15ps, optional 20-100psZero leakageExcellent beam quality (M²<1.3)Exceptional beam pointing stabilityCompact industrial grade ps laserLow maintenance
-
product
Tunable, Ultrafast TI: Sapphire Laser
SPRITE XT
Sprite XT is a flexible ultrafast, femtosecond laser source. It delivers stability, reliability and productivity and is equally at home in the lab or as part of an OEM application. Choose your output power (up to multi-Watts), pulse width (femtosecond or picosecond models), wavelength range (fixed wavelength or tunable), and pulse repetition rate (<80 MHz to multi-GHz). All Sprite models are designed for alignment-free and maintenance-free operation and can be controlled from a web browser. It’s ideal for multi-photon excitation (MPE) and FLIM, quantum optics, time resolved spectroscopy, nonlinear optics, pump-probe experiments, microscopy, amplifier seeding, and electro-optic sampling.
-
product
Turn Key Laser and LED Sources with Picosecond Pulse and Repetition Rate up to 100 MHz
DeltaDiode
DeltaDiodes utilize laser diode and LED technology to generate short optical pulses over a very wide range of repetition rates and wavelengths. Optical pulses as short as 50ps can be generated at repetition rates up to 100MHz.
