-
product
Classification Tree Editor
CTE
The Classification Tree Editor (CTE) is a graphical editor which by means of the Classification Tree Method is used to transform a (functional) specification into a set of test cases.
-
product
Commodity Classification Testing
Underwriters Laboratories Inc.
As a global expert in fire safety science, UL provides an independent assessment of the fire risks associated with various types of stored commodities protected by sprinklers. As a part of commodity classification testing, UL examines many factors including sprinkler activation temperature, sprinkler response time index (RTI), the radial distance from the sprinkler to the center of the fire, the distance between the ceiling and the top of the commodity, and the number of storage tiers.
-
product
Yield Classification Engine
DR YIELD software & solutions GmbH
The Yield Classification Engine (YCE) classifies detected yield issues, provides comprehensive summary reports and memorizes corrective actions.
-
product
Fault Detection and Classification (FDC)
E3™
Fault detection and classification (FDC) transforms sensor data into summary statistics and models that can be analyzed against user defined limits to identify process excursions. For process and equipment engineers, maximizing equipment effectiveness, reducing yield excursions, improving product cycle time and enhancing the overall output of the factory are key success metrics. SmartFactory FDC is built on Applied's equipment control technology, the E3 platform, which promotes information sharing.
-
product
GPU
The MAGIC1A is a rugged line replaceable unit (LRU) suitable for high-performance computing in the harshest of environments. The combination of Intel and NVIDIA processors in a low SWaP-C3 package ensure it can be used across a wide range of commercial and military applications, including displays, situational awareness, data/radar processing, video processing, classification, and artificial intelligence (AI).
-
product
Hall Effect Portable Gauss-Meters
300 Series
Integrity Design and Reseach Corp.
Typical Applications include Measurements of the Earth's field vectors, Air shipment inspection, Mapping and recording field perturbations, Magnet classification, Analysis of magnetic circuitry and components, Magnetic Resonance Imaging (MRI) and Measuring residual fields.
-
product
High Sensitivity Dark Field Surface Inspection
LIGHTsPEED
High throughput• Nanometer scale sensitivity• Autofocus• Full haze characterization• Multisize capability• Pits / Particle distinction• High lifetime / low CoO solid state laser• Advanced Automatic Defect Classification
-
product
Household And Commercial Appliance Testing
Product Safety Consulting Inc.
Product Safety Consulting guides you through the process of obtaining safety certification in the fastest time and for the least cost. We have years of experience testing products according to multiple UL/IEC Standards. We help you not only verify the classification of your appliance, but get you through the conformity assessment process – from designing for compliance, to applicable essential requirements, to testing your product, to achieving certification.
-
product
Industrial Intelligent Spectrometer
OHSP-250 Series
Hangzhou Hopoo Optoelectronics Technology Co., Ltd
Radiometric color measurement is an important application of spectrometers. LED manufacturers use color measurement to classify LEDs (classification criteria: good or bad functions, color brightness standards, etc.) to ensure product consistency and quality stability. Screen display manufacturers use radiometric measurements to calibrate screen colors to determine if they are within the standard range. LED radiation measurement is also very useful in horticulture, because LEDs are also a major part of plant research and greenhouse light sources; in addition, in biomedical applications, such as therapeutic instrument measurement.
-
product
Industrial UPS Systems
Our static uninterruptible power supply systems (UPS systems) correspond to the VFI-SS-11 classification according to IEC 62040-3.
-
product
Information Technology Testing
Product Safety Consulting Inc.
Product Safety Consulting guides you through the process of obtaining safety certification in the fastest time and for the least cost. We have years of experience testing information technology products according to applicable standards. We help you not only verify the classification of your product, but get you through the conformity assessment process – from designing for compliance, to applicable essential requirements, to testing your product, to achieving certification.
-
product
Integrated Gas Alarm & Control System
MCX-32
Teledyne Gas & Flame Detection
The MCX-32 controller features a flexible design that allows the user to customize a system by choosing from a selection of individually addressable field devices or use addressable input and output modules. Detcon’s full range of gas sensors (purchased separately) can be used to create a gas detection system consisting of toxic gas, combustible gas, and/or oxygen deficiency. A wide range of field devices such as liquid level, temperature, pressure, flow, etc., can also be configured for input t...show more -
product
Laser Distance Sensors (Time-of-Flight)
optoNCDT
Laser distance sensors are designed for non-contact distance measurements: laser gauges for measuring ranges up to 10m, laser distance sensors for up to 3,000m. These sensors are used for positioning and type classification in machine building and handling equipment.
-
product
LC/MS/MS MRM Library For Phospholipid Profiling
This MRM library includes two methods: one for phospholipid classification by comprehensive analysis of the main phospholipids in biological samples, and one for fatty acid composition determination created using analytical results obtained with the classification method. The library targets phospholipids containing C14 to C22 fatty acids, and includes MRM transitions for up to 867 components. This library enables performing phospholipid profiling by conducting an initial analysis with a phospho...show more -
product
Moisture Management Tester
Sataton Instruments Technology CO., Ltd
Moisture management tester (MMT) is the tool for the measurement, evaluation and classification of liquid moisture management properties of textile fabrics. By testing the changes in electrical resistance of textiles placed between two horizontal electrical sensors with concentric pins, the tester can calculate fabric liquid moisture content changes that quantify dynamic liquid moisture transport behaviors in multiple directions of the specimen. The software of tester can grade the liquid moistu...show more -
product
Multibeam Echosounder - Deep Water
HydroSweep MD/50
The HydroSweep MD/50 is a high resolution multibeam echosounder ideally suited for seabed mapping in mid and shallow water based on a sonar frequency range between 52 kHz to 62 kHz. Beside bathymetric depth information from 5 m to more than 2000 m, sidescan data and backscatter data for seabed classification can be acquired.
-
product
Multibeam Echosounder - Deep Water
HydroSweep DS
The HydroSweep DS is a deep water multiebeam echosounder ideally suited for seabed mapping in deep water up to full ocean depth based on a sonar frequency between 14 kHz to 16 kHz. Beside bathymetric depth information from 10 m to more than 11,000 m, sidescan data and backscatter data for seabed classification are acquired. The HydroSweep DS does not only gather sea floor information, but also uses adaptive bottom tracking windows to identify sonar targets in the water column and can be optionally operated as a parametric sub-bottom profiler without additional transducers and electronics.
-
product
Multivariate Analysis and Experimental Design Software
The Unscrambler
Analytical Spectral Devices, Inc.
The Unscrambler software from Camo Software is a complete Multivariate Analysis and Experimental Design software solution, equipped with powerful methods including PCA, Multivariate Curve Resolution (MCR), PLS Regression, 3-Way PLS Regression, Clustering (K-Means), SIMCA and PLSDA Classification etc.
-
product
Online Tree Testing Software
Treejack
Take the guesswork out of information architecture with Treejack – the usability testing tool you can use to test your IA without visual distractions. Treejack helps you prove your site structure will work before you get into interface design. Tree testing is a usability technique for evaluating the findability of topics in a website. It’s also known as ‘reverse card sorting’ or ‘card-based classification’. Tree testing is done on a simplified text version of your site structure – without the influence of navigation aids and visual design.
-
product
Open eVision Deep Learning Studio
Ease the evaluation of Open eVision’s Deep Learning toolsDataset creation and image annotation for classification, segmentation, and object localizationCreate and configure dataset splits to decide how your images are usedManage the data augmentation transformationsTrain your tools in succession thanks to the training queueValidation and analysis of the results of the trained toolsAvailable on Windows and LinuxFree of charge
-
product
Optical Oxygen Sensors
The analyzer is suitable for direct field installation (NEMA 4X) in hazardous area (Class I, Division 2). The optical fiber sensor platform allows small inline sensors to be installed into sample tubing lines (1/4”), flow cells using NPT fittings, or directly into tanks or process lines using our retractable “hot tap” sensor design. BOS optical oxygen sensors are impervious to typical O2 poisons (H2S) and interferences (combustibles, magnetic, CO2 and H2) with high accuracy and long-term stabili...show more -
product
Optoelectronics
BOSA Module Auto Assembly MachineKey Features:Compatible with pigtailed and pluggable BOSA module.Visual image parameter collection, detection, classification, recording functions included.
-
product
OST-500 Optical Radiation Test System
Hangzhou Everfine Photo-E-Info Co., LTD
OST-500 is an optical radiation safety test system with 200-3000 nm wavelength range, refer to IEC/EN 62471/CIE S009, IEC/TR 62778, GB7000.1-2015, GB/T 20145, IEC/EN 60598 Annex P., IEC/EN 60598 Annex P. IEC/EN 60432, IEC/EN 60335, GB/T34075-2017, GB/ T34034-2017 2009/125/EC and other relevant standards. The system is equipped with a precision automatic dual-axis turntable, which can automatically find and obtain the maximum radiation position, and automatically measure the photobiohazard value of various lamps and lamp systems (LED products, ultraviolet lamps, lighting sources and lamps, etc.) at the maximum radiation position, and carry out safety classification.
-
product
PMA Suite For The PSL-3424: 802.3at And 802.3bt PSE's
*Tests 802.3 at/bt PSE’s with Any Combination of 2-Pair and 4-Pair PSE ports up to 90W per port*Automatically assess PSE PM Stability and Capacity Management*Tests PSE’s that grant power with Multi-Event, LLDP, or Both Multi-Event and LLDP*Automatically Adapts to PSE maximum assigned class (MAC) and power demotions on 2-Pair and 4-Pair ports*Tests PSE’s with up to 96 PoE Ports*Emulated PD’s are 802.3 specification compliant including built-in support for multi-event classification, power demotion, and 802.3at/802.3bt LLDP*Highly Informative Reports cover dozens of parameters using Colorful Graphics*Available to PSL-3424A and PSL-3424L as optional license feature
-
product
Adaptive Target Recognition System
Information System Technologies Inc.
ISTI’s adaptive target recognition, detection and classification system for sonar imagery can learn in-situ from expert operators’ feedback in order to yield better accuracy and flexibility in making decisions in new environmental and operating conditions. The developed system is based on the intuitive concept of image retrieval, where images submitted to the system are matched to learned images via a similarity measure. An information-based selective sampling measure chooses the new patterns to be used in the in-situ learning.
-
product
Adhesion Test Analyzer
PA-917010
The Adhesion Test Analyzer (ATA) takes all of the guess work and subjectivity out of rating the classification of your adhesion results as defined in the ASTM D3359 standard, and is accomplished with one simple instrument.
-
product
Advanced Traffic Monitor
Datarec Loop Monitor
Vehicle and bicycle detection is based on inductive-loop technology for accurate counting. It utilizes inductive pattern recognition to identify which type of vehicle is passing, providing a precise classification. The product can be delivered as a stand-alone traffic counter or as an advanced part of a complete traffic monitoring system.
-
product
Advanced Vehicle Classifier
Datarec 7 Signature
Traffic registration is based on inductive-loop technology that also utilizes inductive pattern recognition to identify which type of vehicle is passing, providing a precise classification. The product can be delivered as a stand-alone traffic counter or as an advanced part of a complete traffic monitoring system.
-
product
AIS Tester
AIS Tester is professional equipment for surveyors, classification societies and administrative authorities, which can use it to provide qualified testing of the Class A and Class B AIS mobile stations and AIS-SARTs.
-
product
Auto Macro Wafer Defect Inspection
EagleView
EagleView automated macro defect semiconductor wafer inspection system provides industry leading throughput, defect detection accuracy, and wafer classification for semiconductor manufacturing. EagleView systems have inspected over 100 million semiconductor wafers worldwide. The EagleView macro defect inspection tool resolves many of the problems and pitfalls of manual and micro wafer inspection by automating and standardizing semiconductor wafer inspection processes while creating complete imag...show more
